how-to-fix-dns-error-in-windows

How To Fix DNS Error In Windows

Domain Name Servers (DNS) are just like a phone book for Internet. It maintains a directory of domain names and translate them to Internet Protocol (IP) addresses.

DNS error occur when one segment is not connected to another segment properly. There can be network issues or maybe some part might have failed to respond or simply your browser might not be responding.

DNS error might result into stopped Internet. Here, we have solution to this problem. The issue can be resolved by following these steps.

  1. Try Using Another Browser

Try and access the same website from a different browser, if the issue persists, then there might be issues in your proxy settings or your router might not be working.

  1. Try Restarting Your Router and PC

If you have router, then restarting the router and PC can do the trick. Unplug the power source of your router and PC.  Wait for one odd minute. Doing this, will clear the memory and discharge the residual. Now plug it in and wait till it connects.

  1. Check The TCP/IP Settings

You can try and resolve the issue by altering and correcting TCP/IP settings. Follow these steps to resolve the issue –

  • Press Windows Key and R together to get a Run Window.
  • Type “control.exe /name Microsoft.NetworkAndSharingCenter”

check-tcpip-settings

  • Network and Sharing Center will open.
  • Now click on Change Adapter Settings.

https://blogs.systweak.com/wp-content/uploads/network-and-sharing-center.png

  • Right Click on Available Network and Select

properties

  • Highlight TCP/IPv4, then click on Properties.

ipv4

  • Select Obtain an IP address automatically and Obtain DNS Server Address Automatically.

ipv4-properties

Hopefully the internet connectivity issue would have been resolved now. If not, proceed to the next step.

  1. Use Command Prompt:

Resolving network issues can be very cumbersome. Using Command Prompt makes easy to resolve the issue and it is just a set of command that you have to type and it would be done.

Follow these steps to resolve DNS issue:

  • Open Command Prompt with Admin rights. (To open Command Prompt, type Command and right click on Command Prompt and choose Run As Administrator)

cmd

See Also: How to Fix ‘You’re not connected to a network’ Problem

  • Type these commands and hit enter after every command.
  • ipconfig /flushdns – This command tells your PC to clear its IP address and then request the Domain Name Server for a new IP address.
  • ipconfig /registerdns – The command initiates manual dynamic registration for the DNS names and IP addresses that are configured at a computer.
  • ipconfig /release – The command sends a DHCPRELEASE message to the DHCP server to release the current DHCP configuration and discard the IP address configuration for all adapters.
  • ipconfig /renew – It renews DHCP configuration for all adapters.

cmd-for-windows

After performing these steps, the internet issue should get resolved.

Follow the steps and let us know what worked for you!

Srishti Sisodia

Srishti Sisodia is a technical content journalist at Systweak Software. Apart from being a capable engineer, her affinity for inscription draws her towards writing interesting content about contemporary technologies and progressions. She is an avid reader and a fare connoisseur. She relishes different cuisines and when it comes to baking, she takes the cake!

Leave a Reply

Your email address will not be published. Required fields are marked *