How Do I Repair Cyclic Redundancy Check Error While Copying Files

How Do I Repair Cyclic Redundancy Check Error While Copying Files

671Views
Windows

While copying files to your hard drive, if you are receiving Data Error, Cyclic Redundancy Check, don’t panic that you might lose the data. Read the following article carefully, and learn what this error means, why it occurs & what can you do to fix it?

What Cyclic Redundancy Check (CRC) Error Means?

Cyclic Redundancy Check refers to an error-detecting & data verification method commonly used in digital storage devices (CDs, DVDs, Hard Disks & USB Drives, etc.) & digital networks to detect accidental changes to raw data. The main aim of using CRC is to detect & prevent any inappropriate or unexpected changes in raw data that might lead to disk bugs and errors.

Receiving this error can make you helpless to transfer or access the data.

Cyclic Redundancy Check

Possible Reasons Behind Data Error: Cyclic Redundancy Check

When there’s a bad spot on the media of your hard disk, a CRC error may happen. At times, it may also stop responding due to software conflicts, misconfigured system files, corrupted registry entries, cluttered hard disk, or power loss.

The Cyclic Redundancy Check (CRC) Error stops you from copying files, makes the hard disk inaccessible and cause troubles in initializing.

Regardless of any specific cause, Cyclic Redundancy Check (CRC) error is a serious error, and you should perform some effective measures to get rid of the potential data loss or complete system failure problems.

Easy Hacks To Resolve Cyclic Redundancy Check On Windows 10

Check out the list of solutions below to easily fix Data Error Cyclic Redundancy Check:

Before fixing the data error:

Make sure to recover your important files from the initialize disk/external hard drive/SD card. Since the drive is inaccessible now due to the error, you can make use of a dedicated Data Recovery Software.

Advanced Disk Recovery, aiming to restore data lost logically, is a powerful data recovery solution that supports recovering photos, videos, documents, audio files & other multimedia files. You can watch this tutorial to learn how to recover data from hard drive using Advanced Disk Recovery.

Cyclic Redundancy Check ADR

Here’s a complete guide on Advanced Disk Recovery!

Workaround 1- Rename The Drive

In certain scenarios, Windows OS doesn’t automatically allot a drive letter to the newly connected drive. Sometimes it might also de-assigns the drive for safe disconnection when sitting idle. If that’s the case, try renaming it or assigning a drive letter to access it.

Step 1- Press Windows + R to launch the Run window.

Step 2- Type diskmgmt.msc & press Enter.

Step 3-  Your Disk Management tool will list all the drives based on file systems and sizes. Locate the drive you wish to assign the letter to & right-click on it to see more options.

Step 4- In the pop-up menu, choose option Select Change Letter and Paths.

Step 5- Choose option Change if the drive letter is already associated or go for selecting option Add if there are none.

Step 6- In the next pop-up assign a new letter to the drive and Close the window to reboot the system.

reboot the system.

Observe, if this workaround has solved the data error Cyclic Redundancy Check. If not, you can proceed with the next method!

Workaround 2- Utilize In-Built Windows (CHKDSK) Utility

It’s a built-in Windows utility that comes with the ability to find and repair corrupt files.

Step 1: Run Command Prompt as Administrator to have full privileges.

Step 2: Type and execute the following command: chkdsk /f x: (Replace x with the drive letter you’d like to run the scan on.)

Step 3: Wait for the scanning process to get complete. Once done, CHKDSK will show you the report & will ask to your reboot your system.

reboot the system command prompt

If the Cyclic Redundancy Check error is not fixed by running the CHKDSK utility, then you should follow the below-given method.

Workaround 3-  Format the Corrupted Drive

Most probably the above method will solve your problem, but if you’re still encountering the Cyclic Redundancy error, you can consider formatting it. Since you’ve already recovered all your files and data as per the above instructions, then the formatting process won’t take much of your time.

Follow the step by step instruction to format the corrupted drive:

Step 1- Open File Explorer and right-click on the drive you wish to format.

Step 2- From the context menu choose the Format option to start the process.

Step 3-  Deselect the Quick Format option, because you want to clean your drive thoroughly.

Step 4-  Select NTFS if the selected drive is a hard disk or FAT32 in case, the selected drives are pen drives or SD cards.

select ntfs

Go ahead with formatting the drive. If no errors pop-up while the formatting process, you would be able to copy files to and from the hard drive without any hassles.

Bottom Line

Data Error Cyclic Redundancy Check can occur anytime during the data transfer process. The error not only restricts you from accessing your data but also results in data loss. Hence, it becomes quintessential to perform Data Recovery before applying the suggested fixes!

Is this page helpful?

Leave a Reply

View Offer Close