How To Fix Microsoft Software Protection Platform Service High CPU Usage

How To Fix Microsoft Software Protection Platform Service High CPU Usage

553Views
How-To PC Optimization

Is Sppsvc.exe causing High CPU Usage?

Yes, you are in the right place. Here we will discuss sppsvc (Microsoft Software Protection Platform Service) causing High CPU Usage on Windows.

Usually, when Microsoft Software Protection Platform Service” (sppsvc.exe) consumes more CPU power, you face frequent performance problems like a slow startup, random crashes, system heats up, and others?

So, this means your system freezes, or there’s an issue with the performance. So, to resolve this problem and avoid unstable PC problems caused due to the sppsvc.exe process, read further.

Sometimes due to malware infection, junk files, unwanted data, invalid registry entries, disk errors, and more, you might face lagging performance problems. To resolve it, we have a tip for you. Try using Advanced System Optimizer – the best PC cleanup and optimization tool to fix all these errors in one click. Besides, you can also use it to update drivers, clean privacy, exposing traces, optimize memory, undo deletes, and a lot more. To use this fantastic tool, click here to download it.

Moreover, we suggest running the System Protector scans the system for infections and run each module under Disk Cleaner & Optimizers. Here’s a comprehensive review of Advanced System Optimizer.

What is Sppsvc.exe (Microsoft Software Protection Platform)?

Sppsvc is a process related to the Windows Operating System and is an integral part of the Windows OS. The service aims to prevent software interference and piracy, thus helping apply for licenses easily. The High CPU problem on Windows is caused due to two reasons:

  • When using pirated versions of Windows, sppsvc runs in the background and tries to authenticate windows.
  • When using genuine windows, sppsvc interfere with third party application.

Note: If you are using a genuine Windows copy but are running a pirated copy of other Microsoft utilities (like Microsoft office), you might also face this problem.

In either case, disabling the service is the last resort, as it will stop the High CPU usage. But remember doing so will activate the Windows is not activated watermark on the bottom right side of the screen. To resolve this error message, follow the steps below:

Fix: High CPU Usage Caused by Sppsvc.exe on Windows 10

Method 1: Run Windows Troubleshooter

To check if there is any discrepancy with the operating system, let’s run the troubleshooter. To do so, follow the steps below:

1. In the Windows search bar type, are Troubleshoot and select Troubleshoot Settings from the search results.

Troubleshoot setting in windows

2. Now type System Maintenance in the Find a setting window.

System Maintenance

3. Press the enter key. This will System Maintenance window

System Maintenance window

4. Click Advanced > Run as administrator > checkmark the option Apply repairs automatically > Next.

Apply repairs automatically

5. The system Maintenance window will now run as administrator. Click Next and wait for the troubleshooter to detect errors.

troubleshooter to detect errors
If any errors are detected, they will be fixed. You can view them by clicking View Information.

Once it is done to apply changes, reboot the PC.

Method 2: Boot In Safe Mode And Perform a Clean Boot

To confirm if the process still eats many CPU resources, we suggest booting in safe mode or performing a clean boot. Both these methods boot the system with necessary files and drivers. This means you will be able to isolate the problem creating files and will be able to identify what is creating problems.

Click here To learn how to boot in safe mode. However, if we cannot identify the problem of creating files in safe mode, we suggest performing a clean boot. To do so, follow the steps below:

1. Press Windows + R

2. Type msconfig > Ok

3. Click Services tab > checkmark the box next to Hide all Microsoft services. Once you do so, all Microsoft related services will be disabled. Now what you see are third-party services.

Hide all Microsoft services

4. Hit Disable all to stop third party services from running temporarily.

5. Apple > Ok > close System Configuration window.

6. Now press Ctrl+Shift+Esc

7. This will open the Task Manager. Here click the Services tab > select each service > right-click > Disable

8. Now reboot the system and see if CPU usage has come down to normal. If the problem persists, it means some external program is creating problems. Hence, check all the installed programs and uninstall any unknown application.

Method 3: Run System File Checker

System File Checker (SFC) helps scan the system for corrupt system files. Using it, you can look for corrupt Windows files and fix them.

To run an SFC scan, follow the steps below:

1. Open elevated Command Prompt

2. Type SFC /scannow and press Enter. The process might take some time to wait for it to finish. Do not turn off the system in between the process.

3. If any errors are encountered, type DISM /Online /Cleanup-Image /RestoreHealth in the elevated Command Prompt window.

4. This will replace the corrupt files so that you no longer face the problem.

Note: To perform this action, you need to be connected online. Also, the time it takes will depend on the connection speed.

Once the errors are fixed, reboot the system and check if the sppsvc process is running fine or not.

Solution 4: Scanning for Malware

Sometimes, due to malware or virus present in your system, you might also face sppsvc High CPU Usage. Hence scanning the system with the best antivirus tool is important. To know which are the best antivirus, click here. This will help detect viruses that disguise as genuine Microsoft processes.

In addition to this, you can run the System Protector module offered by Advanced System Optimizer. It will scan the system for infections and will clean them. To use this best and powerful PC cleaner, follow the steps below:

1. Download, install, and launch Advanced System Optimizer.

2. Click Security & Privacy > System Protector

Advanced System Optimizer

3. Run the scan and wait for it to complete.

4. Clean all the infections and check if the process is working fine or not.

If this doesn’t work, then try disabling sppsvc service. To learn how to do that, move to the next method.

Method 5 : Disable sppsvc Service

If the above methods did not help try, disabling the service. This might help.

Note: Disabling the service will show the “Windows is not activated” watermark.

Note: Before deciding to use Registry, Editor, be sure you want to do it. A small mistake can damage your OS. Once you are sure you want to do this, only then follow the steps explained below:

1. Press Windows + R

2. Type “regedit” > Ok

3. Navigate to : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\sppsvc

4. Look for the “Start” key in the right side window

start key in windows

5. Double click and change the value data to “4”.

6. Press OK and exit.

7. Restart the system; the problem should now be resolved.

In addition to this, we suggest stopping the service. To do so, follow the steps below:

1. Press Windows + R

2. Type services.msc > Ok

3. Look for the Software Protection service. Right-click > Stop

Software Protection service

This will instantly stop the service and all the related tasks of Software Protection from your computer.

That’s it all. Using these steps, you can resolve sppsvc High CPU usage. Besides, we suggest removing the task from Task Scheduler also. To do so, press Windows + S. Type Task Scheduler > expand the library > and open the following path:

Microsoft > Windows. Now in the right pane find SvcRestartTask > right-click > Disable.

If there are any other entries related to the service, remove them, and restart the system. All this will help resolve sppsvc problem.

FAQ

What is Sppsvc.exe?

Sppsvc.exe is a file by Microsoft, and it is also known as Microsoft Software Platform Protection Service. The service is used to manage digital licenses for Windows and its applications.

Can I delete Sppsvc.exe?

Sppsvc is a trusted file; hence we do not recommend deleting it. However, if you think it is infected, running an antimalware tool is recommended. For this, you can try using System Protector offered by Advanced System Optimizer.

How do I disable the Microsoft Software Protection Platform service?

To disable the Microsoft Software Protection Platform service follow the steps below

  1. Press Windows + R > type “regedit” > Ok
  2. Navigate to : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\sppsvc
  3. Look for the “Start” key > double click change the value data to
  4. Double click and change the Value data to “4” >Ok
  5. Close window and reboot PC

How do I enable Sppsvc EXE?

To enable Microsoft Software Protection Platform service to follow the steps below

  1. Press Windows + R > type “regedit” > Ok
  2. Navigate to : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\sppsvc
  3. Look for the “Start” key > double click change the value data to
  4. Double click and change the Value data to “4” >Ok
  5. Close window and reboot PC
What Do You Think?
Responses

3 COMMENTS

  • Mridula
    Malware protection is also important as sometimes the malware sits in your computer with a name similar to the system files. Advanced System Optimizer helps in providing the system care and protection against malicious infections.

    3 weeks ago Reply
  • Dheeraj Manghnani
    Microsoft Software Protection Platform can be resolved by these steps

    3 weeks ago Reply
  • Mansi Vijay
    Performing a clean boot helped me to get rid of the high CPU usage issue. Thanks for the solutions!

    2 weeks ago Reply

Leave a Reply

POPULAR ARTICLES


AS SEEN ON

View Offer