How to fix 'Windows Has Detected An IP Address Conflict'

How to Fix ‘Windows Has Detected An IP Address Conflict’

563Views
How-To PC Optimization

Unable to access the Internet on the Windows operating system or getting Windows has detected an IP address conflict? You’re not alone. Many Windows users have also reported facing the same problem.

windows ip address conflict

Luckily, there’s a fix for it, and here we explain how to fix Windows IP address conflict.

But before that, we need to know what IP address is and why Windows has detected an IP address conflict message occurs.

What is an IP address?

Internet Protocol popularly known as IP address is a unique digital address assigned to your computer. This means when your system is connected to the network, and you go online, the network can easily identify your device.

But when two devices share this IP address, you end up receiving Windows detected IP address conflict messages. How can two devices have the same IP address?

This happens when there is an issue with either PC settings, router, or network card drivers.

Therefore, when you receive conflicting IP address messages to avoid complications, you should fix it immediately.

tipsAdditional Tip

Most issues you face on Windows are caused due to outdated or corrupt drivers. Therefore, we suggest keeping them updated. You can do it manually, but it can be time-consuming, complicated and complex.

Hence, we bring an easy solution for you, and that is the Driver Updater module of Advanced System Optimizer.

Using this feature offered by the best system optimizer in no time, you can update outdated drivers and fix all driver-related issues. Not only this, but you can also even use this PC cleaning tool to get rid of unwanted junk files, cache, invalid registry errors, and a lot more.

This trustworthy app for the Windows operating system has been in the market for more than a decade and has helped millions of users.

If you want to see how it works, download it now by clicking here.

To learn how to do that follow our guide.

Quick Fixes for Windows has detected an IP address conflict error message

There are several ways to fix IP address issues. So, we will explain all of them one by one.

Note: We recommend you to follow the steps as explained. Do not skip them as they are in order. If a simpler method works, it’s great else you can switch to advanced ways and restore your IP address to fix Windows IP address conflict.

Method 1: Restart your router

Each device connected to the network router assigns an IP address. If the router fails to assign an IP address to the device, you might receive Windows has detected IP address conflict, error message. Therefore, to fix it you need to restart the router. To do so, follow the steps below:

1. Press the power button on your router to shut it down.

2. Wait for a few minutes, until you are disconnected from the internet.

3. Now power on your router.

4. Since we restarted the router, you might have to reconnect the device to the network.

Once you are connected, check if the IP address conflict error message is gone or not.

If not, move to the next solution.

Method 2: Disable and re-enable your network adapter

A network adapter is a piece of hardware that acts as the interface for a computer to a network. It can be an ISB adapter or anything. Shutting down and restarting the adapter can help fix network connection issues on Windows operating systems.

Note: To follow this method, you need to have a local user with administrative permissions.

1. Press Windows + R keys to get the Run window.

2. In Run window, type ncpa.cpl and click OK.

windows has detected an ip conflict

3. This will open the Network connections window. Here right-click the adapter you are using and select Disable from the context menu.

windows ip address conflict

4. Once disabled, you will be offline. Now again click the same adapter and this time click Enable from the context menu.

5. Reboot the device you were trying to connect and check if the IP address conflict message is still appearing or not.

Method 3: Refresh IP address

When it comes to network problems, especially ones with IP addresses, this method always works. For this solution, we will need to use certain commands that will release the old IP address and assign a new one.

Note: To follow this method, Local user accounts should have administrative privileges.

1. Type Command Prompt in the Windows search bar.

2. Select Run as administrator from the right pane.

windows has detected an ip conflict

3. This will launch Command Prompt as an admin.

4. Now, here type following command and press Enter after each command:

  • netsh int IP reset c:\resetlog.txt
  • ipconfig /release
  • ipconfig /renew

5. Let the process finish. Now use the device to see if you are still getting Windows IP address conflict messages.

If the problem persists worry not, we have other advanced methods to fix it.

Method 4: Clear Static IP

Static IP means the address your computer is using is manually configured. Sometimes this too creates problems. Therefore, it is recommended to let the router assign an IP address. Even after following the above three solutions if you are still encountering Windows has detected IP address conflict, we need to use an automatic IP address.

To do so, follow the steps below:

1. Press Windows + R keys to the Run window.

2. In Run window type ncpa.cpl and press Enter key.

windows has detected an ip conflict

3. Right, click the adapter, and this time select Properties from the context menu.

windows detected ip address conflict

4. Again click Properties.

windows has detected an ip conflict

5. Here, look for Internet Protocol Version 4 (TCP /IPv4) and double click it.

windows detected ip address conflict

6. You will now see a new window where under the General tab you need to make sure Obtain an IP address automatically and Obtain DNS server address automatically options are selected.

windows has detected an ip conflict

To apply changes, restart your PC and check for the IP address conflict message.

Method 5: Update Network Card Driver

Alongside causing Windows has detected an IP address conflict, error outdated network drivers can cause serious problems.

Therefore, when you get conflicting IP address messages, try updating the driver.

You can do so by heading to Device Manager, visiting the manufacturer’s website. But both the methods are time-consuming, and they require you to know a lot of things. Therefore, if you want an easy way to do it, we’ve got it covered.

But before that, we will explain how to do it manually via Device Manager.

1. Press Windows + R to open Run window.

2. Here type denmgmt.msc and press Enter

3. This will open the Device Manager window.

4. Here unhide Network adapter section > right-click the driver > Updater Driver

5. You’ll now see a window with here click Search automatically for updated driver software and follow on-screen instructions.

6. If Windows can find the driver update, it will automatically download and install it.

7. Once done restart your computer to see if the problem is resolved.

If you find this process lengthy and time-consuming try using Advanced System Optimizer.

1. Download and install Advanced System Optimizer.

2. Now click the Windows Optimizer module from the left pane and select Driver Updater.

Advanced System Optimier

3. Double click it to launch the module.

4. Click Start Scan Now to detect outdated drivers.

Advanced System Optimier

5. Once the scan is done, select the driver you wish to update and click Update Selected Drivers.

Advanced System Optimier

Advanced System Optimier

6. Restart your computer the problem should be fixed.

If this too doesn’t help, then we are left with only one way.

Method 6: Disable IPv6

This new technology sometimes creates problems, and you get Windows IP address conflict messages. To fix it follow the steps below:

1. Press Windows + R to open Run window.

2. Type ncpa.cpl, press Enter key

3. Right-click adapter and select Properties

4. Here uncheck Internet Protocol Version 6 (TCP/ IPv6)

5. This will disable the latest technology.

6. Reboot your PC

This should surely fix Windows has detected an IP address conflict.

Tada! This is all. We hope you were able to fix Ip address conflict using the steps we explained. Do let us know which steps worked for you in the comments section. If the guide was helpful, share it with others.

What Do You Think?
Responses

One COMMENT

  • hitesh gupta
    The info on IP address has been quite helpful.. thank you for the information

    4 weeks ago Reply

Leave a Reply

POPULAR ARTICLES


AS SEEN ON